Is your car OBD2
equipped (includes 1995-05 NSX and 2000-later S2000)? The new
Linear-Logic ScanGaugeII allows you to tap into your car's built-in
on-board information. You can easily monitor 12 engine parameters, scan
for trouble codes, and track trip data. |
|
BUILT-IN SCAN TOOL
|
|
The ScanGuageII allows you to troubleshoot your own car, read error
codes, and the conditions present when the error occurred. You can also
turn off the “Check Engine” light and avoid those costly trips to the
mechanic. |
|
|
|
DIGITAL GAUGES |
|
Display 4 gauges at a time from the 12 built-in digital gauges. the
information is presented in Real-time! |
|
|
|
TRIP COMPUTER |
|
Automatically tracks four sets of trip data - Each with 11 individually
stored parameters. |
|
|
|
EASY TO INSTALL |
Connects In
Seconds The cable is detachable at the ScanGauge II and can be
connected on the back or side of the unit. Once connected to your
vehicles OBDII port, the ScanGaugeII automatically negotiates
communications with your cars computer - It's that easy!
|
|
COMPACT SIZE |
Fits Almost Anywhere The compact size of the ScanGaugeII allows
you to mount just about anywhere. it's so small, you can even slip it
into your pocket and take it with you.
The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0"
deep. The cord from the diagnostic connector to the control/display is
6' long and about 0.2" in diameter.
More information is available at Linear-Logic's website here:
http://www.scangauge.com/products/ |
|
|
|
WHATS INCLUDED? |
The ScanGaugeII includes the
display unit and OBD2 cable. The unit is powered by the car's OBD2
system - no power wires or batteries required. The specially designed
OBD2 plug with a cable that is placed on the side of the plug making
installation as clean as possible. The cable can be plugged into the
display unit on the side or back depending on your installed position.
An extra OBD2 cable is available as an optional purchase below. |