new -
ScienceofSpeed FI
Exhaust Systems updated
- stealth license
plate bracket -for 2002+ NSX
new -
CT Engineering
Gen II Exhaust updated -
ScienceofSpeed
Billet Carbon
Twin Clutch
new -
3.5L NSX
Short Block
new -
AEM Series 2 EMS
for
1995-05 NSX
new -
engine mounts
new -
front license
plate bracket
new -
composite center console
new -
standard, cross
drilled, and slotted brake rotors
new -
ATI Crankshaft
Super Damper
new -
Door Sill Pads
ScienceofSpeed
offers the "crate" 3.5L NSX Short Block.
The ScienceofSpeed 3.5L NSX Short Block is a complete blueprint
assembled NSX cylinder block and balanced rotating assembly.
The 3.5L NSX Short Block includes a re-sleeved factory cylinder block,
the ScienceofSpeed 86mm 4340 billet crankshaft, 4340
billet connecting rods, and forged pistons. This is a complete assembled
short block ready for cylinder heads and accessories to be installed.
The larger displacement 3.5L engine with a 93mm bore and 86mm stroke
greatly increases power through out the RPM band with much greater
torque at lower engine speeds. Natural aspiration 3.5L engines are
capable of up to 450 horsepower at the engine with suitable induction
and cylinder head modification and forced 3.5L induction engines are
capable of in excess of 700 horsepower at the engine with suitable
forced induction system.
The engine short block for natural aspiration use uses a lighter weight
tapered H beam connecting rod with 5/16" CARR bolts while the forced
induction application includes a heavier duty connecting rod with 3/8"
CARR bolts rated for 150 hp / cylinder.
complete cylinder head gasket & seal kit
for 3.5L short block - part no. enpp-1933 sold below - includes head
gaskets and all seals required to complete engine cylinder head
assembly
Note: installation requires cylinder head and accessory installation. The short block program utilizes customer
supplied bare cylinder blocks. All wear surfaces are machined for
like-new condition. A refundable core deposit will
be charged on check out. For complete terms and conditions of the core exchange program,
please
click here. As new cylinder liners are installed and main
journals are bored fresh, each cylinder block is brought to new
condition. However, you may elect to have the short block built with your own
provided cylinder block.
specs
fitment:
NSX, all years
gallery
ScienceofSpeed 3.5L Assembled Short Block (naturally aspirated) - NSX, all years (list: $16,825)
[enpp-1931]
$14,920.00
ScienceofSpeed 3.5L Assembled Short Block (forced induction) - NSX, all years (list: $16,825)
[enpp-1932]
$14,920.00
complete cylinder head & seal kit for 3.5L short block - NSX, all years
![230-005[1].jpg (47329 bytes)](/products/exhaust_airflow_products/NSX/CT-Engineering/exhuast/230-005[1]_small.jpg)
NSX, all years
