new -
ScienceofSpeed
Billet Carbon
Twin Clutch
new -
JRZ RS Pro
new -
Speed Engineering
directional vented
brake rotors
new -
Comptech S/C
1200/1220 Upgrade
new -
Paxton 1200/1220
Supercharger Pulleys
new -
license plate frame
new -
vinyl decal
new -
wastegate solenoid
valve kit
new -
Hard Dog Roll Bar
new -
Injector
Dynamics
Fuel Injectors
new -
wastegate actuator
offset linkage
new -
low profile
oil drain flange
new -
S2000 Edition
new -
Mahle Pistons for
factory block
new -
short sleeve
t-shirts
new -
ScienceofSpeed
Apparel
new -
Kics Leggdura
Lug Nuts new -
AEM Inline
Wideband UEGO new -
06-09 4-BAR
MAP Sensor new -
Hondata FlashPro
2006-09 S2000
The
Password:JDM Dry Carbon Air Induction System is the pinnacle of intake
design for the Honda S2000. The system consists of three major
components. The ram air duct draws in cold pressurized air from the
front bumper area fitting with out having to cut or modify the bumper or
hood. Next, the cold air chamber housing the filter insulates the intake
from underhood heat. Lastly, the intake passes through the PowerChamber
which acts as a reservoir of air volume for best throttle response and
power.
All three components are manufactured from dry carbon (dry carbon Kevlar
also available). This resin-impregnated carbon material is vacuum bagged and cured pressure in an
autoclave for the strongest and lightest part (the entire system weighs
1.8kg/3.9lbs - compared to 4.4kg/9.7lb of the factory intake).
The
system has been dyno tested with back to back testing the factory intake
system compared to the Password:JDM Air Induction System. The testing
resulted in a maximum gain of 12.5 wheel hp (4000 RPM) and 11.6 wheel hp
at peak power (click for larger image of dyno graph). These gains are
unprecedented compared to any other system previously tested.
With out a doubt, this is the most advanced intake system available for
the S2000 manufactured and designed with techniques usually reserved for
a multi million dollar chassis race car.
specs
fitment:
S2000, all years
gallery
dry carbon fiber
dry carbon Kevlar
Password:JDM Dry Carbon Air Induction System
[eap-851]
$999.99
Password:JDM Dry Carbon Kevlar Air Induction System
![2406_3_L[1].jpg (44859 bytes)](2406_3_L[1].jpg)
The
Password:JDM Dry Carbon Air Induction System is the pinnacle of intake
design for the Honda S2000. The system consists of three major
components. The ram air duct draws in cold pressurized air from the
front bumper area fitting with out having to cut or modify the bumper or
hood. Next, the cold air chamber housing the filter insulates the intake
from underhood heat. Lastly, the intake passes through the PowerChamber
which acts as a reservoir of air volume for best throttle response and
power.![2406_10_L[1].jpg (131444 bytes)](2406_10_L[1].jpg)
S2000, all years![2406_2_L[1].jpg (49424 bytes)](2406_2_L[1].jpg)
![2406_4_L[1].jpg (46269 bytes)](2406_4_L[1].jpg)
![2406_7_L[1].jpg (219201 bytes)](2406_7_L[1].jpg)
![2406_6_L[1].jpg (197298 bytes)](2406_6_L[1].jpg)
![P1010022[1].jpg (249891 bytes)](P1010022[1].jpg)
![P1010021[1].jpg (224125 bytes)](P1010021[1].jpg)
![P1010019[1].jpg (274189 bytes)](P1010019[1].jpg)
![2437_2[1].jpg (197322 bytes)](2437_2[1].jpg)
![2437_3[1].jpg (191013 bytes)](2437_3[1].jpg)
![2437_4[1].jpg (193665 bytes)](2437_4[1].jpg)
![2437_5[1].jpg (153731 bytes)](2437_5[1].jpg)
