Honda JDM Switch Panel & Switches


Japanese and European NSXes are equipped with accessories not found on the US market NSX. This switch panel is placed where the US factory coin tray unit is installed. Up to four switches can be added - any combination of constant (turns on and stays on when pressed - such as for fog lamps) or momentary (stays on only when pressed - such as for a garage remote) switches may be used. Blanks are available if you do not wish to use all four slots. The switches can be used to turn on relays for accessories like fog lamps, radar detectors, etc. Relays (for circuits requiring more than 1 amp) and fuses must be used with switches to power accessories.

The factory connectors for these switches are not made available separately from the factory. ScienceofSpeed is able to source these connectors however, as well as the terminals. These kits come with a spare pin as well, in case. For each momentary switch, you will want a 5 pin connector kit. For each constant switch, you will want a 6 pin connector kit.

Instructions are included for the installation, along with pin-out. One switch panel, and and any combination of four switches or blanks required.
Honda Switch Panel - NSX, 1991-05


Honda Blank for Switch Panel - NSX, 1991-05


Honda Constant Switch for Switch Panel - NSX, 1991-05


Honda Momentary Switch for Switch Panel - NSX, 1991-05


Honda Switch connector kit, 5 PIN (momentary, for ipp-726)


Honda Switch connector kit, 6 PIN (constant, for ipp-725)