Hondata FlashPro


The FlashPro allows full user tuning and datalogging of 2006-09 Honda S2000. It includes Windows based software called FlashProManager.

The FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide 90 second programming with a variety of calibrations with extensive real-time and stored datalogging capabilities.

Click here for a comparison of engine management systems for 2006-09 Honda S2000.

Important notes:

  • FlashPro is available for USA, Asia, & European markets with the following ECU part numbers:
Vehicle ECU Part Number FlashPro Part Number
2006 + US S2000 PZX-A07 through PZX-A21 enpp-1531
Hondata FP-S2K-US
2006 + Asia S2000

PZX-J01 through PZX-J21

Hondata FP-S2K-INT
2006 + Euro S2000 PCX-G02 through PCX-G16

Hondata FP-S2K-INT

You will need to remove a plastic cover in order to see the sticker containing the part number.
Note: for supercharger or turbocharger applications above 10 psi using the FlashPro, the factory MAP sensor must be upgraded. ScienceofSpeed recommends the ScienceofSpeed 4 BAR MAP sensor for supercharged or turbocharged applications above 10 PSI.


General Features

  • Programmable ECU interface
  • Connects via OBDII diagnostic port
  • USB 2.0 connection
  • Works with laptop or desktop computers
  • No ECU modification necessary
  • 90 second ECU programming time
  • 20 hours on board datalogging memory
  • FlashProManager Windows software (compatible with Intel based Macs running Bootcamp)
  • Check and clear diagnostic codes
  • Customizable laptop gauges
  • Readiness codes and smog check status
  • Dual calibration storage - upload from one of two calibrations stored in the FlashPro

Tuning Features 

  • Ignition, fuel, idle speed editing
  • VTEC window
  • Rev and launch limiters
  • Map tracing & lambda overlay
  • Expanded fuel, ignition & cam angle tables for forced induction.
  • 4 bar MAP sensor support (40 psi) (click here for recommended)
  • Support for larger injectors
  • Injector latency / dead time
  • Individual cylinder fuel & ignition trim
  • Turbocharger Boost Control (requires factory ECU upgrade performed by Hondata after FlashPro is purchased)
  • Wideband oxygen sensor input (recommended for supercharged or turbocharged S2000s - click here for recommended). For more information, click here, then double click "Installation", then click "Wideband lambda interface"
  • Starting calibrations for intake, headers, forced induction & larger injectors
  • Fully functional cruise control
  • For a more detailed feature lists see the FlashPro help file
Hondata FlashPro - S2000, 06-09 (USA version - part no FP-S2K-US)


Hondata FlashPro - S2000, 06-09 (international version - part no FP-S2K-INT)