Enkei RPF1 Wheels (set of four 17x8.0 / 18x10.0), F1 Silver - NSX, 1991-05
$1,450.00
SKU
epp-270x
Enkei is an official supplier of the McLaren Honda Formula One Team. The RPF1 was developed using the same technology as the Formula One race wheel.
TWIN SPOKES: Enkei’s dual open stance spoke design is used on the McLaren Honda Formula One race wheel. The twin spokes achieve better stress dispersion on curves, hard braking, and extreme race driving. Made in Japan, the Enkei RPF1 is a strong, lightweight, yes cost-effective wheel.
CENTER DESIGN: Enkei’s pocket design around the bolt circles increases rigidity and keeps the wheel cooler during aggressive race driving.
MAT PROCESS: Shaping by the MAT process reduces wheel weight by 10%-15%. Every pound of unsprung weight savings has the effect of reducing overall vehicle weight by 20lbs.
Features
MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T.) combines one-piece cast wheel technology with a rim forming spinning process technology. Using this new technology of casting and rim forming by M.A.T. process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.
SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.
LIGHTWEIGHT:
- 17x8.0+45: 16.1 lbs
- 18x10.0+38: 18.5 lbs
COLORS:
- F1 Silver
SIZE OPTIONS:
- option 1: front: 17x8.0+45 / rear: 18x10.0+38
- option 2: front: 17x8.0+35 / rear: 18x10.0+38 (aggressive front offset for front big brake clearance - see details below)
RECOMMENDED TIRE SIZES:
- 215/40-17 & 265/35-18 (click for all tires in this size)
BRAKE CLEARANCE:
- factory brakes ok
- Brembo GT requires 17x8.0+35 or 3mm spacer with 17x8.0+45 or 18x10.0+38
Includes
- set of four wheels
- four aluminum valve stems
Options
- Centering rings: are optional (click here).
- Center caps: not included, available here.
- Lug nuts: Aftermarket 60-degree lug nuts are required. Click here for options. A factory style option is offered here.
Check items to add to the cart or
