ScienceofSpeed Subwoofer Enclosure - NSX, 1991-05 (LHD only)

Newly redesigned, we proudly introduce the evolution of the ScienceofSpeed Audiophile Subwoofer Enclosure for Acura NSX. Featuring an all composite design -  our new subwoofer enclosure is lighter, stronger, has increased volume, and decreased intrusion into the passenger's footwell compared to our previous model.

We completely redesigned the enclosure to maximize volume while making the intrusion into the passenger's footwell an absolute minimum. By doing so, we were able to increase volume to .63 cu/ft while reducing intrusion into the footwell.

The ScienceofSpeed Audiophile Subwoofer Enclosure replaces the existing factory plastic enclosure that holds a meager 4" speaker. Only modification required is to remove the brackets that are spot welded in place to hold the factory unit. By replacing this unit and fitting deeply under the dash, a large 10" woofer with sufficient volume to produce crisp low range frequency response. Once installed, the subwoofer becomes hidden and the interior maintains a factory like appearance.

The enclosure is molded and produced with a rigid FRP composite shell. The enclosure is unfinished in a black gelcoat, and can be painted as desired (not required, as it is hidden). This gives the enclosure good rigidity, a good seal for woofer rebound, and a consistent fit. Floating fasteners allow for a variety of woofers to be used with different screw patterns. The ScienceofSpeed Subwoofer enclosure includes a custom stepped face design that flush mounts the subwoofer. 

The ScienceofSpeed Subwoofer Enclosure was designed around the low profile Audison APS 10D 10" subwoofer. This subwoofer produces the best low frequency response that we have heard in this enclosure. Other 10" low profile subwoofers will also fit. If you will not be selecting the enclosure with the subwoofer we recommend, please download this template and check your subwoofer prior to purchasing.

Audison APS 10D (available with enclosure):
diameter: 10"
power (peak): 800 W
power (continuous): 400 W
voice coil: Dual 4 Ohm voice coil

The kit includes the subwoofer enclosure, hardware, and polyfill (and subwoofer and grill if purchased together).

NOTE: Enclosure is designed for left hand drive (LHD) vehicles only. All electronic power steering (EPS) NSX require the EPS module to be relocated to the glove box, which can be done so without wire harness modification.

If you are removing your factory door speakers and amplifiers, ScienceofSpeed will buy them from you!  We are willing to pay $100 per amp that you send in, and is a good rebuildable core.  There is 1 amp in each door speaker assembly, and 1 in the subwoofer box assembly.  Contact us at [email protected] to take advantage of this offer while it lasts.