JRZ RS Pro Suspension System - S2000
$0.00
SKU
spp-58xx
JRZ RS Pro Suspension System:
The JRZ RS Pro is a full featured racing damper. It offers several unique features found only in high end racing dampers.
The RS Pro shock absorbers have been developed from many years of professional racing experience by JRZ. The RS Pro features many of the same features as the full featured racing dampers intended for the dual purpose street driven & club racing vehicle.
JRZ RS Pro Suspension System:
The RS Pro is more similar to the full featured JRZ racing damper than the RS One or Two (not currently offered) - featuring a mono tube shock absorber and remove reservoirs for increased fluid capacity and heat control featuring separate compression and rebound adjustment.
how the shock absorbers are sold:
Because JRZ manufactures and supplies the shock absorber only, ScienceofSpeed offers the bare shock absorbers alone, or as a complete kit for factory top mounts or with available machined aluminum top mounts.
- bare shock absorbers
bare shock absorbers only. User must supply top mounts, mounting hardware, and spring set. - factory top mount kit w/ complete spring kit:
Designed to use factory top mounts. Offers the best ride quality with reduced noise and vibration. Complete bolt-on kit including shock absorbers, top mount sleeves, mounting hardware, main springs, spring joiner plate, and helper springs. ScienceofSpeed includes premium Hyperco springs with an exclusive helper spring design with increase spring block height (pictured above) - eliminates contact between spring perch and joiner plate under full compression. This design is lighter weight than a tender spring commonly used by other suppliers. The customer may use our recommended spring rates, or elect to use any other spring rate at no additional charge. The customer must drill the factory top mount bushing's steel washers (alternatively, a set of eight new factory bushings and modified steel washers for customers that do not wish to modify their bushing washers). The existing factory top mount plates are reused. - ball bearing top mount w/ complete spring kit:
Includes billet aluminum top mounts with spherical bearing. High performance design offers the best precise control of the shock absorber with some noise and vibration. Complete bolt-on kit including shock absorbers, top mounts (two options, see below), mounting hardware, main springs, spring joiner plate, and helper springs. ScienceofSpeed includes premium Hyperco springs with an exclusive helper spring design with increase spring block height (pictured below) - eliminates contact between spring perch and joiner plate under full compression. This design is lighter weight than a tender spring commonly used by other suppliers. The customer may use our recommended spring rates, or elect to use any other spring rate at no additional charge.
Features
- large piston monotube design - large piston allows control for even minute shock absorber travel.
- external reservoirs with remote lines - offer superior fluid temperature control with an advanced compression adjusting mechanism in the remote reservoir.
- swivel banjo fittings - allows movement and best positioning of the high pressure hoses (swivels provided on both ends of hose).
- S2000-specific - lightweight machined billet aluminum shock absorber bodies & forks - allows increased shock absorber travel by eliminating the use of "universal" shock absorbers requiring adjusting lower mounts used by other brands that decrease suspension travel. Threaded body allows ride height adjustment.
- double adjustable - independent low speed compression (on remote reservoir) and rebound adjustment (on top of shock absorber).
Options
top mounts:
ScienceofSpeed offers two top mount options included in the complete kits. ScienceofSpeed utilizes an exclusive shaft design to allow the shock absorber to be utilized with either the factory top mount or a machined billet aluminum top mount with a spherical monoball bearing.
- factory top mount kit - The factory top mounts are ideal for most applications. The factory design uses a stiff elastomer bushing vulcanized to a steel washer. This high performance design reduces noise and vibration to the chassis while providing excellent control of the shock absorber. The kit includes a set of machined billet stainless steel sleeves that replaces the factory sleeve allowing the JRZ shock absorber to be used with the factory top mount bushing. The customer must drill the factory top mount bushing's steel washers (alternatively, a set of eight new factory bushings modified by ScienceofSpeed are offered for customers that do not wish to modify their bushings). The existing factory top mount plates are reused.
- machined aluminum top mount kit - For dedicated track use where increased noise and vibration from rigid mounting is not an issue, this kit includes a set of four machined billet aluminum top mounts with spherical monoball bearings and billet steel step bushings.
Check items to add to the cart or
