Want to add a number of sensors or CAN devices to your aftermarket engine management system only to not have enough sensor ground or sensor +5V sources, CAN inputs, or other power sources?
Rather than splicing one wire and sharing it among many sensors or devices, the ScienceofSpeed Bussing Module is a convenient way to share these circuits among many sensors or devices. The module features 6 groups of internally bussed or joined circuits. One sensor ground from the ECU is shared among multiple sensors for example. A typical example would be to use the bussing connector to share battery positive, battery negative, sensor +5V, sensor ground, CAN high, and CAN low wires among a variety of sensors and devices.
The assembly uses a SuperSeal 26-position connector (3-1437290-7) and terminals (3-1447221-4), which are not included.